Easy Garage Door Repair Tips to Help You Save Money

Doing a garage door repair is one of the most difficult things to face especially if you are not familiar with technical DIY home repairs. Because garage doors are a combination of complicated electronics, hard-to-understand mechanical workings and hard-to-handle materials, most people shy away from doing these repairs and just leave it to a door technician to fix the job. The problem is, repairing of the doors in your garage might cost you a lot of money. A simple garage door installation already costs close to a thousand dollars, Hiring technicians to repair your door’s simple problems will only add up to your expenses.

Major repairs such as panel and door spring replacements will usually call for the help of expert technicians. But as much as possible, you must first try and see if you can fix the problems on your own before you go out and look for help. In the case that you have a screeching garage metal door that causes a lot of noise when opened or closed, the first things that you have to check are rusty hardware and old door screws. People do not realize it but half of the time, it is the combination of rusty hardware and old screws that serves as the culprit when it comes to the problem of screeching garage doors. If you are able to check these little issues first before calling out the technician to do the minor repair, you might be able to save a lot of money.

If you have a door in your garage that does not fully go down when it is closed and it springs right back up before even reaching the ground, the main culprit is usually a misplaced door sensor. A door sensor that is not placed properly will most certainly cause your garage door to do unwarranted acts such as not closing down 100%. To fix this, just place your door sensors a little lower than your current placement. You might also want to check if there are objects and hindrances blocking the sensor because it can also contribute to the said problem.

Doing a door repair for your garage is not an easy task especially if you are not an “electronics” or “mechanics” kind of person. But you must also put in mind that doing simple DIY door repairs will not hurt especially if the problems are too trivial to even call a door technician. Sometimes, a non-working door might even be fixed by simply replacing the batteries of your door opener. If you want to be frugal and save more money in the bank, learning simple DIY repairs of your garage is a must.

Do you want to learn how you can save thousands of dollars? If you want to keep more money in the bank, learning how to do a simple garage door repair is a must!

For information on a garage door company click here.

Controling the Draft in Door Gaps

Every month thousands of people waste money on their energy bill because of tiny gaps in their window and door jams. These gaps cause heating or air conditioning to escape to the outside world causing the air conditioner or heater to work harder which costs more money. In the winter months you will notice a draft by your front or back door where the outside cold air is getting in. There are ways of sealing all your door and windows that will help cut back on wasted electricity that will in turn put money in your pocket.

One way you can remedy this problem, is by insulating your outside doors and windows. You can purchase foam insulating strips from a hardware store. They come with a foam insulating pipe on one side and a sticky adhesive on the other side. You will need to open the door or window that you will be working on first, pull the paper backing off of the adhesive and follow the seam of the door or window jam. When you close the window or door this foam insulating strip will seal the jam creating a tight seam where no air can enter or escape.

If you have a draft problem on the base of the door, there is a product that will seal the bottom of the door that will keep the cold air where it needs to be: either inside your home in the hot summer months, or outside in the cold winter months. It runs on the same basic concept as the mentioned before. This door gap gauge has two pieces of foam or tubes that are attached to both sides of the base of the door for maximum protection. It creates a perfect seal on both sides of the door. This will not only help with draft problems but it will also protect your home from bugs, dirt, and snow from getting in. The draft guard is very easy to use and easily installed, you can cut it to fit any size door.

If you are concerned with the rising cost of energy as most of the country is, insulating your door jams and windows is essential to lowering your bill. This will cut the cost of cooling your home in the hot summer months and keeping your home warm from the outside cold in the winter months. You can also use these tips on the inside jams in your home to keep drafts from the hall into a bedroom and it will also help with dust and bugs that live inside your home.

4 Good Reasons to Have a Roofing Contractor Roof Your Home in the Winter

If you live in an area of the country, such as Oklahoma, with harsh winters you might be wondering why anyone would consider roof replacement in the winter time. Well, it’s not as uncommon as you might think. Many roofing contractors offer their services year round even in cold and snowy regions¬†like Oklahoma, which is where I’m from. Roofing homes during the winter is no different for a roofing contractor than doing it any other time of the year, with a few exception, and some roofing contractors and there crews even say that they prefer it. First let’s go over what makes roofing more difficult this time of year and the arguments against having a new roof installed right now.

It’s too cold outside for a roof replacement.

This argument just doesn’t hold any water. It may be cold out now but who cares? Your roof doesn’t care. The crew installing your roof doesn’t care. Don’t worry about the guys doing the installation. If the cold weather bothered them that much they wouldn’t be up there installing your new roof in the first place, they would be working an indoor job. I know a lot of guys that prefer roofing in cold weather just because it is cold. Try roofing a black roof in the middle of the Summer. Lots of fun, let me tell ya. In the Summer if it is 90 degrees on the ground it feels like 110 degrees up on that roof (and sometimes is).

There is too much snow on my roof to have it replaced right now.

This, my friend, is why God created snow shovels. It is really not a big deal to shovel the snow off of a roof. It usually takes a half-hour to an hour to remove the snow and most roofing contractors don’t even charge you extra for this as long as they are there to replace the roof and not just shovel snow. Does the crew need to be careful while doing this to avoid falling? Of course. However, the crew needs to be careful in every regard when it comes to roofing a house, this is nothing new. These guys are professionals and safety should always comes first, and does always come first with a responsible roofing company.

Alright, I just gave you 2 reasons why many people think roofing shouldn’t be done in the winter and why they aren’t really very good reasons at all. Now let me give you the 4 best reasons you should consider having your roof replaced this time of year.

1.) Ice dams causing leaks.

The winter time in Oklahoma tests your home and roof in ways unlike any other time of year. The most common cause of roof leaks during the winter is the dreaded ice dam. An ice dam is formed over the eaves of a house from built up snow melting and running down the roof only to refreeze at the very edge of the roof line. Here in Oklahoma, as well as other cold climate areas, roofing contractors use a product called “ice & water barrier” together with proper drip-edge flashing techniques to prevent ice dams from damaging your home and causing leaks. This technique, when done properly, provides added protection for at least 3 feet up from all edges of the roof. Many older roofs do not have “ice & water barrier” installed. If your roof is leaking because of ice dams this could be a great time to have the roof redone properly and insure that ice dams will not be bothering you and your home again.

2.) Winter conditions, in general, make a bad roof worse.

If you had a bad roof before winter hit it is only going to be in worse shape once spring arrives. There are many factors that adversely affect your roof in the cold weather. I already discussed ice dams but there’s more. During the winter as the temperature fluctuates it makes your shingles expand and contract causing curling and cracking in older shingles. Now let’s say some of your old roof shingles curl a bit, then you get a nice wet, heavy snow and the weight of the snow causes some of those curled shingles to crack. Now you have a potential new roof leak. Also, when that wet, heavy snow then freezes it will possibly cause even more damage to your old roof shingles. The thawing and refreezing that occurs throughout the winter time is nothing but bad for old shingles. Old roofs hate the cold winters.

3.) Faster service on your new roof installation.

It’s a simple fact that Tulsa roofing contractors, and roofing contractors in general, are not as busy during the winter. What this means for a homeowner needing a new roof is that the roof contractor you choose might be able to install your new roofing in a matter of days from the time that you sign the contract as opposed to waiting weeks, or even months sometimes, if you hold off until the spring, summer, and fall months. For many homeowners this reason alone should be enough to have your roof done in the winter time.

4.) Save money by taking advantage of a slow time of year for roofers.

Who doesn’t want to save as much money as possible especially when it comes to an expensive home improvement project such as re-roofing. For the same reasons that you may be able to receive faster installation service on a new roof from a roofing contractor during the winter, you will also probably receive a better price than you would during the warmer months. Experts in Tulsa provide professional roof installers and can provide you with the same labor warranty for a roof installed in winter time as a roof installed any other time of year. The material warranty is provided by the shingle manufacturer and will be the same regardless of what season the roof was installed. Roofing contractors want to keep their crews busy and will give you a better price just to avoid having to lay off employees during the winter slowdown.

So what are you waiting for? If you have a house with an older roof that needs replacing get in touch with a local roofing contractor and find out for yourself why roofing Tulsa homes or a home in any other area is a perfectly viable option in the winter time and often a bargain!

Necessary Tools in a PEX Tool Kit

Making a PEX water supply structure is not related with exploiting solvent, cement or any sort of heat infusion methodology. For this it is important to have a PEX tool kit as all fittings and connections made are mechanical. Different type of tools which make a kit complete must be known to have entire knowledge about an effective tool kit.

PEX crimp tool:

This tool is used for crimping PEX tubing with black copper rings. It used to make crimp fittings only which are required for carrying on appropriate amount of water in all connections.

PEX clamp tool:

The PEX Clamp Tool is another imperative component of a PEX tool kit which is required for making clamp fittings between two different connections.

Go-No-Gauge:

This type of tool is used by fitters to check connections and calibrate the tool for crimp as and when necessary. One such tool is the Crescent wrench which is used for making necessary variations in crimp jaws of varied sizes.

PEX cutters:

It is a tool which is required for cutting the PEX tubing in varied sizes so that they can be used for required work. Normally it used for heavy duty models of PEX pipe which are inclusive of an inbuilt mechanism that enables the cutting of tubing up to an optimum thickness level.

PEX Clip Guns:

Another imperative tool of a PEX tool kit is clip guns. It is a gun like structure which is used for placing connecting guns at appropriate places over the pipe. It is a highly convenient tool which can pick up 15 to 20 clips at stretch of sizes ” or “.

Foam Board Staples:

It is another most used tool in the kit which is used for making installations over top surfaces of polystyrene, polyurethane and Styrofoam. This type of tool is obtainable in form stapler which is used for placing strip of these materials. The end part of these staplers is arrow shaped which makes it much safer to pick strips and place it in the foam board.

If you too want to purchase a PEX tool kit then go for one which comes with all basic units please visit https://bighomechores.com/best-pex-crimping-tools/.